Internal Support Resource – Legacy Desktop Software Only
This procedure applies to customers using Spirit 3.0 heart rate monitors with the original IHT desktop application and Sony reader.
Do not use these instructions for Spirit 4.0 monitors or the current IHT Classroom App.
Open the legacy IHT desktop application.
Connect the Sony reader to the computer.
Select Settings in the lower-left corner.
Open the Heart Rate Inventory tab.
Place the new Spirit 3.0 monitor face down on the Sony reader.
Wait for the Add Heart Rate to Inventory prompt.
Enter the assigned monitor number.
Press Tab to populate the associated sticker color, as demonstrated.
Click OK.
The video explains that the monitor is added to the school's shared inventory.
After the monitor is added, the desktop application displays a prompt asking whether to install the latest firmware.
Select Yes.
Keep the monitor on the Sony reader while the update processes.
Wait for the update completion message.
The video estimates approximately two minutes or less per monitor.
When the update is complete:
Review the confirmation message.
Remove the monitor from the Sony reader.
Allow the monitor to finish its LED sequence.
The video demonstrates flashing indicator lights as the monitor completes the update.
The video describes a one-time inventory process for each new monitor.
Monitor inventory is shared at the building level in the demonstrated system.
These instructions are specific to legacy Spirit 3.0 equipment.
Confirm current firmware support and update availability before directing customers through this process.
For Spirit 4.0 and Classroom App customers, use:
How to Add Heart Rate Monitors to Inventory Using the IHT Classroom App
How to Update Heart Rate Monitor Firmware Using the IHT Classroom App
For additional assistance, contact IHT Customer Success at support@ihtusa.com.