IHT Spirit 3.0 heart rate monitors may require a firmware update using the TEDI Ref application and a compatible Sony Reader.
This tutorial demonstrates the process using firmware version 3.24.10.
Important: Before beginning, contact IHT Customer Success to confirm that you have the correct firmware file, compatible software, and authorization to perform the update.
Before starting, make sure you have:
The TEDI Ref application installed on your computer.
The approved firmware file downloaded to your computer.
A compatible Sony Reader.
Your Spirit 3.0 heart rate monitor.
For the update demonstrated in the video, the firmware file is identified as 3.24.10 BIN.
The firmware file must have a .BIN extension.
Open the TEDI Ref application.
Place your Spirit 3.0 heart rate monitor face down on the Sony Reader.
Confirm that the monitor is ready for communication with the application.
In the TEDI Ref application, select Load Defaults.
Click Write to apply the factory default settings.
Important: Loading factory defaults changes the monitor's configuration. Follow the remaining steps to restore the required settings after the firmware update.
Open the Firmware tab.
Locate the Path field.
Click the three-dot button beside the field.
Navigate to your Downloads folder.
Select the approved 3.24.10 .BIN firmware file.
Click Open.
The selected file should now appear in the Path field.
Click Upgrade.
Watch the progress indicator as the firmware update runs.
Wait for the upgrade process to finish before proceeding.
Do not interrupt the update or remove the monitor during the process.
After the firmware upgrade is complete:
Return to the User Data tab.
Locate Display Mode and select School.
Configure the mode setting demonstrated in the video. The exact Enable Mode field and value require confirmation.
Change the communication setting from Sony Reader to Bluetooth.
Click Write to save the settings.
Important: Restoring the School display setting and Bluetooth communication setting is a critical part of completing the update.
After the firmware upgrade and configuration steps have been completed, you can proceed to the next Spirit 3.0 heart rate monitor.
How to Update Spirit 3.0 Heart Rate Monitor Firmware Using TEDI Ref
Insert Vimeo video link.
If you couldn't find the answers you're looking for, please submit a support request here.
Select your state and the type of assistance you need so we can direct your request to the appropriate support specialist.