Older IHT heart rate monitors running firmware version 2.x have a specific procedure for switching to App Mode.
Important: Do not install a 3.0 firmware update on a 2.0 monitor. Applying the wrong firmware can permanently damage the monitor.
Identify your monitor's firmware version. Confirm that the firmware begins with 2.x before proceeding.
If you need to check the firmware version, confirm that your Sony reader and IHT Spirit Desktop App are working.
Watch the Switch a 2.0 Monitor to App Mode video.
Follow the instructions demonstrated in the video for switching your 2.0 monitor to App Mode.
Do not use the Teddi Ref App or install firmware version 3.24.10 on a 2.0 monitor.
If you cannot confirm the firmware version, stop and contact IHT Support before attempting any changes.
The instructions above are only for monitors running firmware version 2.x.
If you have a 3.0 monitor, refer to the separate Older Monitor Conversion Guide and follow the instructions for your specific model and firmware.
Do not assume the conversion procedure for a 2.0 monitor also applies to a 3.0 monitor.
Contact IHT Support at support@ihtusa.com and include your school and district, your monitor model, and the firmware version if known. Do not share passwords or sensitive student information.