Proper electrical connections are essential for protecting your IHT Spirit charging cases and heart rate monitors. Electrical surges, voltage fluctuations, and other power-quality issues can affect charging performance and potentially damage equipment.
IHT requires Spirit charging cases to be connected to a properly functioning, UL-listed surge protector plugged directly into a grounded wall outlet.
Connect your equipment in the following order:
Grounded Wall Outlet → UL-Listed Surge Protector → IHT Spirit Charging Case
Plug a UL-listed surge protector directly into a properly grounded wall outlet.
Connect the charging case's manufacturer-specified power adapter to the surge protector.
Connect the adapter to the Spirit charging case.
Place the monitors securely into their charging positions.
Verify that the charging equipment is operating normally.
Both wall-mounted surge protectors and surge-protected power strips are acceptable when they meet IHT's requirements.
Use a surge protector with the following specifications:
Rated for 125V, 15A electrical service.
Listed to UL 1449 for surge protection.
At least six grounded outlets for typical classroom charging setups.
A visible surge-protection status indicator, preferably with a grounding indicator.
Connected directly to a properly grounded wall outlet.
Do not connect multiple surge protectors or power strips together.
Do not connect your Spirit charging case:
Directly to a wall outlet without surge protection.
To a charging cart.
To an ordinary power strip without surge protection.
Through an extension cord.
Through multiple connected power strips or surge protectors.
These configurations do not meet IHT's Spirit charging case power requirements.
Always use the manufacturer-specified power adapter for your charging case.
Older Adidas-branded and newer IHT Spirit-branded charging cases may have different hardware configurations.
Check the adapter label and contact IHT Support if you are unsure which adapter is appropriate.
Do not substitute a power adapter simply because the connector fits.
Electrical surges, voltage fluctuations, or electrical line interference may affect charging equipment.
If your school experiences repeated breaker trips, flickering power, or suspected electrical problems:
Stop using the affected outlet or charging setup.
Ask your school's facilities or maintenance team to inspect the outlet and electrical circuit.
Check the surge protector's status indicator.
Contact IHT Support if monitors or charging equipment are no longer operating correctly.
Surge protectors help protect against certain voltage spikes but cannot correct faulty wiring or sustained electrical problems.
If multiple monitors stop charging at approximately the same time:
Disconnect the affected charging equipment from power.
Do not continue charging equipment showing signs of damage, overheating, or unusual odors.
Record how many monitors are affected.
Note whether the monitors still power on or record heart rate data.
Contact IHT Support before attempting additional charging tests.
Our team can help evaluate the charging setup, monitor models, and appropriate next steps.
IHT's charging requirements are intended to protect both the charging case and connected monitors.
According to IHT's Charging Case Power Requirements, damage associated with improper electrical connections, power surges, voltage fluctuations, or other external electrical events is excluded from the IHT Limited Warranty.
Failure to follow the required charging configuration may affect warranty coverage for the charging case and connected Spirit monitors.
For complete warranty terms, visit:
IHT Charging Case Power Requirements
Review the official illustrated guide for acceptable charging configurations and surge protector requirements.
How do I charge IHT heart rate monitors?
Watch the IHT Charging Tutorial
Monitor Not Charging?
If your monitor continues to have charging problems, please review our article:
IHT Heart Rate Monitor Not Charging – Troubleshooting & Replacement Request
You can also submit a request using the IHT Warranty Replacement Request Forms.
Contact support@ihtusa.com and include your school or district, monitor model, number of affected monitors, and a description of the issue.
Our support team will help determine the appropriate next steps.