How do I reset a Spirit 4.0 monitor

How do I reset a Spirit 4.0 monitor

How do I reset my IHT Spirit 4.0 heart rate monitor?

There are three ways to reset your IHT Spirit 4.0 heart rate monitor, depending on the issue you are experiencing. If your monitor is not displaying your heart rate correctly, is unresponsive, or is not working as expected, follow the instructions below to select the appropriate reset option.

Important: Start with the least disruptive reset option. A soft reset will end an active workout session, while a hard reset will erase all data stored on the monitor.

Option 1: Reset Heart Rate Only

Best for: When your monitor is functioning but your heart rate is not displaying or updating correctly.

  1. With the Spirit 4.0 monitor on your wrist, short-press the button four times to navigate to the Reset HR screen.

  2. You will scroll past the time in zone goal, minimum/maximum heart rate, and time/date screens before reaching Reset HR.

  3. When the screen displays Hold to Reset, press and hold the button for 5–7 seconds.

  4. Release the button when the checkmark appears.

What happens next?

This resets the heart rate reading only. Your active workout session will not be interrupted.

You may see a temporary drop to zero on the workout graph while the monitor resets and begins detecting your heart rate again.

Option 2: Soft Reset

Best for: When your monitor is frozen, unresponsive, or not functioning correctly.

  1. Remove the Spirit 4.0 monitor from the charging case or personal charger.

  2. Press and hold the monitor button for 12–15 seconds.

  3. Release the button after the reset completes.

What happens next?

  • The monitor hardware resets and the monitor turns off.

  • Any ongoing workout session will end.

  • The monitor's time resets to 00:00.

  • When a new session begins, the monitor will detect the time from the connected device and update automatically.

Important: A soft reset closes any active session. Do not perform a soft reset during a workout you want to continue recording.

Option 3: Hard Reset / Factory Reset

Best for: When other troubleshooting steps have not resolved the problem and a factory reset is necessary.

  1. Place the Spirit 4.0 monitor into a powered charging case or connect it to a personal charger.

  2. Press and hold the monitor button for 12–15 seconds.

  3. Release the button after the reset completes.

What happens next?

  • The monitor returns to its factory settings.

  • The monitor's memory chip is cleared.

  • The monitor's time resets to 00:00.

  • When a new session begins, the monitor will detect the time from the connected device and update automatically.

Warning: A hard reset permanently erases all data stored on the monitor. Make sure any important workout data has been transferred before performing this reset.

Illustrated Reset Guide

For additional guidance, including images of the monitor and reset options, see:

Spirit Monitor Reset Options — Illustrated Guide

Still Need Help?

If your monitor still isn't working after trying the appropriate reset option, contact support@ihtusa.com.

Please include your school and district, monitor model, and a brief description of the issue. Do not share passwords or sensitive student information.